Exhibition

Home > News > Content
What Time To Buy A Fully Automatic Exercise Book Making Machine?
Jun 22, 2017

What time to buy a Fully Automatic Exercise Book Making Machine?
With the development of society, science and technology progress. Now, the binding machine has become an indispensable office life of a device. Although a lot of people who have seen the binding machine, but in the office when buying a lot of people do not know how to better select the automatic practice machine? Xiaobian just like to understand the following to buy a Fully Automatic Exercise Book Making Machine must know how it!
  1, binding specifications
  The stapling specifications refer to the maximum punching width and the perforated area, that is, the maximum width between a staple pinhole used in a stapling process and the area of a pinhole
  2, milling cutter form
  Milling cutter form Milling cutter form refers to the installation of milling machine inside the milling machine, generally mostly comb and pull type. But in accordance with the milling cutter can also be divided into small milling cutter, large milling cutter, small milling cutter + milling cutter, sun cutter and so on. One of the small milling cutter is particularly suitable for office, sun cutter can be achieved binding hard cover text. Small milling cutter + large milling cutter for design institutes, universities, copy shops, small and medium-sized printing short version of fast books, tenders and drawings binding
  3, binding thickness
  Fully Automatic Exercise Book Making Machine Binding thickness is the thickness of the binding machine can bind the file, usually in millimeters (mm) as a unit, but some products are binding pages (number of pages) to measure. The general binding machine can bind the thickness of more than 20mm to 50mm, or about 400 pages. Ordinary applications can choose 20mm products. There is a special need to choose to bind the larger thickness of the product. The thickest binding thickness is 80mm.
 Automatic practice machine method: When the drill edge is not sharp or need to clean up:
  1. Remove the drill: Press the key to run the drill bit down about 2CM. (A piece of paper is placed on the table below the drill to prepare the paper when the drill is removed.) T-wrench When the second screw is released, the drill bit should be held so that the drill bit is damaged by heavy duty.
  2. Fully Automatic Exercise Book Making Machine Clean the drill bit: Loosen the butterfly screw on the grinder body, pull out the plunger, insert the drill bit into the sharpener body, align the end of the shank with the end face of the sharpening body, fix it with butterfly screw, reinsert Insert the stick, with the palm of your hand to beat the head, the top of the drill bit of scraps of paper.
  3. Fully Automatic Exercise Book Making Machine Grinding the drill bit: Insert the drill bit into the sharpener body so that the end face of the shank is aligned with the end face of the sharpening blade, fixed with a butterfly screw, and the cutter is slowly inserted into the sharpener body to reach the drill tip. Clockwise force evenly rotating grinding machine 5-6 times (not too hard, otherwise the drill will bend). Remove the drill bit to check if the mouth is sharp.
  4. Press the "Down" button to move the drilling motor down 2-3cm, open the upper part of the drill transparent window, clean up the internal scraps of paper.