Exhibition

Home > News > Content
Easy To Solve The Fully Automatic Exercise Book Making Machine
Jul 18, 2017



Easy to solve the Fully Automatic Exercise Book Making Machine

Fully Automatic Exercise Book Making Machine for the need professional work and technology, now a lot of manufacturers in trying to research and development, but because of complex professional, to achieve a key binding easily, a variety of processes for a key, so a lot of unprofessional follow manufacturers are currently only do OEM business, looking for the professional manufacturer of automatic to stick a card. Is specialized in the production of fully automatic machine manufacturers are still on the market for royal fine and doing well in bandung, providence this several, also because of their power, now the Fully Automatic Exercise Book Making Machine professional manufacturer's machine is very stable, durable, convenient, all there will be no big problems, even if a problem is also a small problem, such as common mainly include feeding alarm or not, and so on and so forth, this does not matter, we'll teach you daily processing methods: specific as follows:

When the machine is working, if there is a failure or warning, the panel of the fully automatic machine will be bright or flashing, which can be detected by the following method.

When punching Fully Automatic Exercise Book Making Machine more than expected, after the completion of the riveting tube binding without cut, usually from three aspects: to detect the cause of the problem, first to see if blanking motor rotation, secondly the tremie pipe and gear gap is too big, again see if blanking detection switch Angle is not correct.

Machine to work properly, suddenly occur feed alarm, lights flashing, first check whether the riveting tube will be used up or lack of material, at this point will be placed on the tops of the Fully Automatic Exercise Book Making Machine needle from insert into the mouth, until the insert the plastic tube, pay attention to not too hard, gently downwards rotated 360 degrees clockwise, make the rest of the set of pipe on the needle, and needle to pull out from the into the mouth, with the top of the needle out of the leftover material, may continue to bind after inserting new riveting tube. It is important to note don't use nylon tube bending, otherwise can't normal use.

Needle sometimes take but no material remove and insert the new tube, after the machine still can't work, the plunger on the leftover materials, press plunger action, stay thimble the leftover material with tweezers tweezers live, such as automatic thimble, after falling out with material. Note: the thimble is not completely down, before the riveting tube and the thimble are dissecting, do not use tweezers to pull the pipe to avoid the needle, so that the machine can not work.

Still have a plenty of machine, without question, it is more than expected, to have a look at the riveting tube material, small factory now for more market share, preemption consumables blindly hold down prices, particularly hard material, more for plastic, even at that time is can use, can let the machine often eat these something hard, sooner or later to appear indigestion, and particularly hurt the machine cutter, suggested that it is best to use the original nylon material material or similar material used by manufacturer.

The Fully Automatic Exercise Book Making Machine is developed on the basis of Fully Automatic Exercise Book Making Machine. This series of binding equipment has been upgraded and optimized through years of technical upgrading and structural optimization, so that the binding operation can be fully automated, easy to operate, safe and reliable, and economical and practical. It has been widely used in the financial books and documents of the Banks, industry and commerce, taxation and other industrial and mining enterprises, and has been fully recognized by the market.

The Fully Automatic Exercise Book Making Machine is developed on the basis of self - training machine. This series of binding equipment has been upgraded and optimized through years of technical upgrading and structural optimization, so that the binding operation can be fully automated, easy to operate, safe and reliable, and economical and practical. It has been widely used in the financial books and documents of the Banks, industry and commerce, taxation and other industrial and mining enterprises, and has been fully recognized by the market.

1. When the machine is working, it is strictly forbidden to touch the drill knife with the hand or place the hand under the drill knife or the cardboard.

2. The power switch should be turned off when loading and unloading, so as not to be injured by mistake.

3. The drill knife is very hot when drilling, and cannot touch its surface with the hand to avoid scalding. If you need to replace the drill knife, you must wait until the drill knife is cooled and then disassembled.

4. When the drill knife does not drill through the paper and returns automatically, please take the operator to remove the drill knife, grind the drill knife or replace the drill knife.

5. Avoid drilling holes in the drilled or already bound locations or it will result in blocking.

6. The spacing of binding holes should not be too small, or it will affect the forming of the binding tube.

7, each about 50 after drilling, special rubber gasket turning 60 °, rotating with a week later, please replace the special rubber gasket, cannot use ordinary rubber pad or other alternatives! 8. Pay attention to cleaning the chip box at the bottom of the machine in time, so as not to cause the failure of the machine