Exhibition

Home > News > Content
Brief Introduction Of Hot Melt Glue Binding Notebook Machine Features
Jul 31, 2017

Brief introduction of Hot Melt Glue Binding Notebook Machine features
      Hot Melt Glue Binding Notebook Machine is a mechanical way to paper, plastic, leather and other binding nails or hot melt adhesives, nylon tube and other materials fixed binding equipment. The Hot Melt Glue Binding Notebook Machine is a fully automatic Hot Melt Glue Binding Notebook Machine, it is the power as the power source, through the machine within the automatic mechanism to achieve automatic binding function. Hot Melt Glue Binding Notebook Machine for a wide range of widely used in offices, financial rooms, schools, offices and other departments have the needs of the binding requirements of the companies and units.
      Why is the scope of application of hot melt adhesive binding notebooks so wide, what is it in the end? Here Xiaobian give you a list of Hot Melt Glue Binding Notebook Machine binding advantages:
      1, unconditional fastening binding: a unique drilling pressure riveting system, for any special folding, irregular binding, whether it is angle, slope, the middle sandwich can easily stapling;
      2, the drill wear automatic monitoring system: When the Hot Melt Glue Binding Notebook Machine drill bit blunt after no manual judgment, the system can automatically detect and make the drill automatically return, and prompt the operator to drill the drill;
      3, Hot Melt Glue Binding Notebook Machine machine using cpu control, the whole punching process to complete a key, accurate action, stable operation;
      4, pressure riveting system using 36 volt safe voltage supply of the unique design to ensure the safety of the operator;
      5, the security system is extremely perfect: in any case, just press the "stop" button, Hot Melt Glue Binding Notebook Machine opportunity to stop, without any inertia;
      6, the use of internal chip removal and quiet design, completely solve the traditional binding process of paper dust, dust and noise on the human body hazards;
      7, high-quality nylon casing binding, binding easy and convenient and stapler more beautiful and durable, will not produce a single page off, binding documents to ensure durability for more than 20 years;
      8, the scientific pressure, speed ratio design, eliminating the Hot Melt Glue Binding Notebook Machine bit plug and break phenomenon;
      9, rigorous scientific design, precision machining, strict quality control of the production process, a strong guarantee of the quality of the machine.
 In the process of using hot-melt adhesives, we will inevitably have a variety of problems, resulting in inefficiencies, and now through a variety of channels to collect some of the more common problems, and these problems and the reasons for the problem And the solution is organized as follows:
    1, after drilling hole, at the mouth of the tube at the cut off the tube.
    Reason: a, do not insert the staple tube into the bottom of the catheter. B, the staple tube is too curved.
    Solution: a, insert the staple tube into the bottom of the catheter. B, replace the straight binding tube.
    2, after drilling, from the nozzle to take out the stapling tube and the bookings do not match the thickness (too long or too short).
    Reason: a, the binding pipe is about to run out, from the mouth of the mouth is removed from the remaining material head. B, tube measurement system to be re-adjusted.
    Solution: a, insert a new tube into the insertion tube insertion port, and remove the drill pipe and then operate again (no drilling only cut tube) cut the appropriate length of the tube. B, adjusted by professional maintenance personnel.
    3, pressure riveting very laborious.
    Reason: a, warm-up time is too short, resulting in hot riveting temperature is too low. B, the use of the machine set the temperature does not match the binding tube.
    Solution: a, by the professional maintenance personnel to adjust the temperature. B, replace the appropriate binding tube.
    4, binding tube turn cap surface is not slippery.
    Reason: a, hot riveting temperature is too high. B, the use of the machine set the temperature does not match the binding tube.
    Solution: a, by the professional maintenance personnel to adjust the temperature. B, replace the appropriate binding tube.